Click for high res picture


High Performance Sockets and Adapters

Tel: (800) 404-0204 U.S. Only or (952) 229-8200
Fax: (952) 229-8201
email: info@ironwoodelectronics.com

PRESS RELEASE
Date: February 2003


Package Converter allows use of PLCC Altera EP1810 in place of unavailable Device in PGA

Users can use Altera EP1810LI-45(PLCC) in place of unavailable PGA EP1810LI-45 M

EAGAN, MN. – February, 2003 – Ironwood Electronics’ new PC-PLCC_PGA-EP1810-S-01 allows users to use Altera EP1810 devices in PCB’s designed for PGA devices no longer available. This allows use of the same PCB without modification thus saving redesign cost and production shutdown when using these devices. The device is constructed with PLCC pads on top for mounting the EP1810 PLD. The PC-PLCC_PGA-EP1810-S-01 is then installed into the PGA pattern and soldered. The EP1810LI-45 is 68 pin 1.27mm pitch PLCC and it replaces the EP1810LI-45 in a PGA68 with a 11x11 array on 2.54mm centers. The PC-PLCC_PGA-EP1810-S-01 uses gold plated pins so that it can be reliably socketed or soldered into the target PCB.


Call for pricing information.


Ironwood Electronics, Inc.
11351 Rupp Dr.
Suite 400
Burnsville, MN 55337


Tel: 952-229-8200 or (800) 404 – 0204
Fax: 952-229–8201
info@ironwoodelectronics.com
www.ironwoodelectronics.com