 |
 Click for high res picture |
High Performance Sockets and Adapters |
|
|
Tel: (800) 404-0204 U.S. Only or (952) 229-8200
Fax: (952) 229-8201 email: info@ironwoodelectronics.com
PRESS RELEASE |
Probing Adapters for 32 and 48 Pin MLF
Users can Connect Logic Analyzer and Scopes to MLF (QFN)
IC’s and Test Boards With MLF (QFN) IC’s In-Circuit
|
EAGAN, MN – February, 2005 – Ironwood Electronics’ new high performance Probing Adapters CA-MLF32A-A-01 and CA-MLF48A-A-01 allow probing of 32 and 48 pin MLF’s (QFN) with logic analyzers such as the Agilent 167XX or Tektronix TLA7XX. These adapters are compatible with Cypress Microsystems CY8XXXXX PSOC IC’s or other chips in 32 and 48 pin MLF (QFN) with 0.5mm pitch. The SMT foot is simply soldered to the same pads as for the IC using standard soldering methods. The compatible MLF (QFN) SMT socket adapter foot is available separately such that many boards can be instrumented by moving the probing adapter between PCB’s. The IC is installed into the ZIF socket on the probing board. The Probe Board is connected to the PCB attached SMT foot with a male to male pin adapter. Both the Probe Board and the SMT Socket Adapter have gold plated Machined Pins and the male to male adapter is also gold plated for highest reliability. These patent pending adapters are available immediately. |