Advanced Search

High Performance
Sockets & Adapters

November 2016

BGA 378 GHz socket30 GHz Bandwidth Socket for mixed pitch BGA378

Socket your 378 pin BGA packages on any PCB without significant performance loss and without soldering

EAGAN, MN - November, 2016 - Ironwood Electronics has recently introduced a new high performance BGA socket for 0.61mmx0.635mm pitch BGA 378 pin IC's. The SG-BGA-7303 socket is designed for 18.2x9.7mm BGA package and operates at bandwidths up to 30 GHz with less than 1dB of insertion loss. The sockets are designed to dissipate up to several watts without extra heat sinking and can handle up to 100 watts with custom heat sink. The contact resistance is typically 20 milliohms per pin. The socket connects all pins with 30 GHz bandwidth on all connections. The socket is mounted using supplied hardware on the target PCB with no soldering, and uses smallest footprint in the industry. The smallest footprint allows inductors, resistors and decoupling capacitors to be placed very close to the device for impedance tuning. The socket also incorporates a simple hardware installation method so that IC's can be changed out quickly.

The SG-BGA-7303 sockets are constructed with high performance and low inductance elastomer contactor. The temperature range is -35 C to +100 C. The pin self inductance is 0.15 nH and mutual inductance of 0.025 nH. Capacitance to ground is 0.01 pF. Current capacity is 2 amps per pin. Elastomer requires proper force for operation which is applied through a torque limiting driver via compression screw. Typical IC's that can be tested using this socket have 378 balls, 18.2x9.7mm with 0.61mmx0.635mm pitch and 27x14 ball array.

Pricing for the SG-BGA-7303 is $890 at qty 1; with reduced pricing available depending on quantity required.

Sue Huang
1335 Eagandale Court
Eagan, MN 55121

Tel: 952-229-8200 or (800) 404-0204
Fax: 952-229-8201

©2019 Ironwood Electronics. All rights reserved. Privacy Policy