Swivel Lid Spring Pin BGA Socket for LVDS IC Socket your 77 pin BGA using Extreme Temperature Socket with Superior Electrical Performance
Ironwood Electronics recently introduced a new BGA socket addressing high performance requirements for testing BGA devices – SBT-BGA-6537. The contactor is a stamped spring pin with 31 gram actuation force per ball and cycle life of 125,000 insertions. The self inductance of the contactor is 0.88 nH, insertion loss < 1 dB at 15.7 GHz and capacitance 0.097pF. The current capacity of each contactor is 4 amps at 30C temperature rise. Socket temperature range is -55C to +180C. Socket also features a floating guide for precise ball to pin alignment. The specific configuration of the package to be tested in the SBT-BGA-6537 is Low-voltage differential signaling chip (BGA, 11.8×16.9mm, 1.27mm pitch, 77 position, 7×11 ball array) used for communication protocol. The socket is mounted using supplied hardware on the target PCB with no soldering. To use, place the BGA device into the socket base and swivel socket lid on to the base using the shoulder screws. The socket uses a compression screw to apply downward pressure enabling the device be interconnected to the target PCB. This socket can be used for hand test and characterization applications with the most stringent requirements.
Pricing for the SBT-BGA-6537 is $475 at qty 1 with reduced pricing available depending on quantity required.